www.prolight.co.uk
Evora CMY300 Zoom Spot
User Manual
7
Installation
Before installing the fixture, the supporting structure (ie. truss) must be able to hold a minimum of 10
times the fixtures weight without any deformation (eg. 15kg - 150kg point load). The fixture must be
secured with a secondary safety attachment when being installed (ie. an appropriate safety cable).
Never stand directly below the fixture when mounting, removing, and/or servicing.
Overhead installation requires experience and qualifications to calculate working load limits, the
material being used at the installation area and periodic safety inspections of the fixture and installation
material. If you do not have the relevant experience and/or qualifications please do not attempt the
installation yourself. The installation should be checked annually by a qualified person.
The eLumen8 Evora CMY300 Zoom Spot can be operated where the base of the fixture is horizontally
orientated, this includes standing the fixture upright on a flat, level surface or hanging the fixture upside
down. Do NOT install the fixture in a sideways position or in a position where the base of the fixture is
orientated vertically or at an angle. Always use a safety wire as an extra safety precaution to prevent
damage/injury in the event a clamp fails (see the next page for clamp installation). Never use the carry
handles for secondary attachments.
