www.prolight.co.uk
Evora CMY300 Zoom Spot
User Manual
13
8) Locate the gobo that will be replaced. Grip the edges of the gobo holder and carefully lift the holder until is
raised from the surface of the gobo wheel (pictured left). Pull the gobo holder towards you, away from the gobo
wheel (pictured right).
9) Place the gobo on a flat surface with the gear side down. Locate the tab of the spring clip using a precision pick
(or similar) and push the spring clip inwards to release it and remove the spring clip. Carefully remove the gobo
from the holder avoiding scratching the gobo. Install the new gobo and follow the previous steps in reverse order.
Rotating Gobo Replacement
