www.prolight.co.uk
Kudos 60 Beam
User Manual
8
Operating instructions
Main Menu
Sub Menu
Options/Values (Default Settings in BOLD)
Description
Test
Reset. M
Pan&Tilt
Reset Pan/Tilt Motors
Test. Chan
Auto. Pro, PAN, PAN-Fine, TILT, TILT-Fine, Move. Sp,
Strobe, Dimmer, Red1, Green1, Blue1, White1,
Chase, Chase. Sp, Dim Modes, PANConRot,
TILTConRot, ColorMacro, DimmerFine, Chase Fade
Test Functions
Panel. Ctrl
Fine Adjustments
Calibrate
Password
Password =
050
Calibration of Motors
Program
Select. Pro
Pro. Part 1
Program 1-Program 9
(Program 1)
Program Select
Pro. Part 2
Program 1-Program 9
(Program 2)
Pro. Part 3
Program 1-Program 9
(Program 3)
Remote Address:
When this function is switched
“ON”
the user is able to define the required DMX address via a controller.
To remotely adjust the fixtures address, connect the fixture to a controller and power the fixture on.
Set the DMX value of
“Channel 1”
to
“007”
on the controller. Then set the DMX value of
“Channel 2”
to
“007”
or
“008”
on the controller (
“007”
- allows the address to be set from 001-255,
“008”
- allows
the address to be set from 256-511). Now use
“Channel 3”
on the controller to set the required DMX
address. After setting
“Channel 3”
to the required DMX address wait for approximately 20 seconds for
the fixture to register the setting.
Example 1:
If the required DMX address is 076,
“Channel 1”
to
“007”
and
“Channel 2”
to
“007”
, then set
“Channel 3”
to a DMX value of
“076”.
Example 2:
If the required DMX address is 435,
“Channel 1”
to
“007”
and
“Channel 2”
to
“008”
, then set
“Channel 3”
to a DMX value of
“179”
(435–256=179)
.
Calibrate:
The calibrate funtion allows fine adjustments to be made to the motors for when a sensor has been
knocked slightly out of place. This function has been password protected to refrain from improper use.
The password to access this menu is
“050”
and must be entered each time the calibration menu needs
to be accessed.
