A
31A
4.
Try another DMX controller.
D. The lamp is cutting out intermittently
1.
Internal temperature may be too high. Check if replacement of fan is needed on the head.
E. If The pan belt is broken
1.
Turn off the mains power.
2.
Loosen the screws (A)
，
open the cover (B).
3.
Loosen the screws (C).
4.
Unplug all the connection cables over the belt.
5.
Fit a new belt (D), put the belt around the
axis gear and motor gear.
6.
Plug all the connection cables back around the belt.
7.
Tighten all the screws.
F. If The tilt belt is broken
1. Turn off the mains power.
2. Loosen all the screws (A) that fix the bridge(B).
3. Fit a new belt (C). Please adjust the tension of the belt properly. Note: do not stretch the belt
too tight as it is can easily snap.
4. Tighten all the screws.
