Eltron Strata LP2684 User Manual Download

Page: 18 / 64

•

Holding

the FEED button down will cause

the printer to continuously Form Feed until

the button is released. The printer will feed

the media until the next top of form is

reached.

•

Holding

the FEED button without media

loaded will cause the printer to continuously

(line) feed until the button is released or me-

dia is detected. This is useful when reloading

media in the printer and is also know as

“Power Media Loading”.

•

Holding

the FEED button down while pow-

ering up the printer with media loaded will

cause the printer to enter the AutoSense

mode. See AutoSense on page 32 for impor-

tant details.

Always run the AutoSense procedure when

loading new media. Media from the same

manufacturing lot and having identical

dimensions do not need to have the AutoSense

procedure run every time new media is loaded.

The Form Feed length is set by printer

programming

( Q )

command in EPL2

programming language) or the AutoSense

feature, an automatic label and gap length

sensing operation. See AutoSense, page 32.

Continuous media with no label gaps, black

mark mark or notch hole, require programming

to set the form length and feed distance.

980181-001 Rev.B

Operation

•

Holding

the FEED button down will cause

the printer to continuously Form Feed until

the button is released. The printer will feed

the media until the next top of form is

reached.

•

Holding

the FEED button without media

loaded will cause the printer to continuously

(line) feed until the button is released or me-

dia is detected. This is useful when reloading

media in the printer and is also know as

“Power Media Loading”.

•

Holding

the FEED button down while pow-

ering up the printer with media loaded will

cause the printer to enter the AutoSense

mode. See AutoSense on page 32 for impor-

tant details.

Always run the AutoSense procedure when

loading new media. Media from the same

manufacturing lot and having identical

dimensions do not need to have the AutoSense

procedure run every time new media is loaded.

The Form Feed length is set by printer

programming

( Q )

command in EPL2

programming language) or the AutoSense

feature, an automatic label and gap length

sensing operation. See AutoSense, page 32.

Continuous media with no label gaps, black

mark mark or notch hole, require programming

to set the form length and feed distance.

980181-001 Rev.B

Operation

Summary of Contents for Strata LP2684

































































Search results

Summary of Contents for Strata LP2684

Reviews:

Related manuals for Strata LP2684

Brands by name

Popular brands

Eltron Strata LP2684, User Manual

Search results

Summary of Contents for Strata LP2684

Reviews:

Related manuals for Strata LP2684

Brands by name

Popular brands