Eltron Eclipse LP2344, User Manual

Page: 20 / 52

Loading Labels
or Tags
Your printer can print on continuous direct
thermal paper, direct thermal adhesive backed
labels or non-adhesive tags. Loading either la-
bels or tags are easy, (the feed direction of tags
is different).
Refer to Appendix B for a list of supplies avail-
able from ELTRON.
DO NOT TOUCH the printhead or the
electronic components under the printhead
assembly.
The discharge of electrostatic energy that
accumulates on the surface of the human body
or other surfaces can damage or destroy the
printhead or electronic components used in
this device.
Adhesive backed labels that DO NOT lay flat
on the backing liner may jam the printer. This
can cause the label to peel off the liner. The
exposed edges may stick to the label guides
and rollers inside the printer. Always use high
quality, Eltron approved labels. Supplies can
be ordered from ELTRON by calling 1(800)
344-4003.
If you should run out of labels while printing,
DO NOT turn the power switch OFF (0) while
reloading or data loss may result. The printer
will automatically resume printing when a new
label roll is loaded.
14
980158-001 Rev.A
Operation
CAUTION
CAUTION