background image

 

- 6 - 

Caution

 

 
1. 

Do  not  attempt  to  disassemble  or  alter  any  part  of  the  equipment  that  is  not  expressly 
described  in  this  guide.    Disassembly  or  alteration  may  result  in  high-voltage  electrical 
shock.  Internal  inspections,  alterations  and  repairs  should  be  conducted  by  qualified 
service personnel only. 

2. 

Ensure minimum distances of 5cm around the apparatus for sufficient ventilation.  Do not 
place the product in closed bookcases or racks without proper ventilation. Ensure that the 
ventilation  is  not  impeded  by  covering  the  ventilation  openings  with  items,  such  as 
newspapers, table-cloths, curtains, etc. 

3. 

No naked flame sources, such as lighted candles, should be placed on the apparatus. 

4. 

It shall not be exposed to dripping or splashing and that no objects filled with liquids, such 
as vases, shall be placed on the apparatus. 

5. 

Use of power sources, or batteries not expressly recommended for this equipment  may 
lead to overheating, malfunction of the equipment, fire, electrical shock or other hazards. 
Use only the recommended power source. 

6. 

Do not use or store the equipment in humid or dusty area. Attention should be drawn to 
the use of apparatus in tropical and/ or moderate climates. 

7. 

Danger  of  explosion  if  battery  is  incorrectly  replaced.  Replace  only  with  the  same  or 
equivalent type. Batteries shall not be exposed to excessive heat such as sunshine, fire or 
the  like.  Never  throw  batteries  in  fire!  Attention  should  be  drawn  to  the  environmental 
aspects of battery disposal. 

8. 

Where  the  mains  plug  or  an  appliance  coupler  is  used  as  the  disconnect  device,  the 
disconnect device shall remain readily operable. 

9. 

Marking plate is located at bottom enclosure of the apparatus. 

 

 

Power Supply and Frequency Range

 

 
Power Source 

 

AC230V~50 Hz, 5W 

Back-up Batteries  

2 x 1.5V 

“AAA” size/LR03 batteries or equivalent 

 

(not supplied) 

Frequency Range  

FM 87.5 

– 108 MHz 

Power Consumption (standby mode) : <1W   
 
 

Due to continuous product development, design and specifications are subject to change without notice . 

Summary of Contents for ZEBU 06PLL







Reviews: