- 4 -
Alarm Operation
Wake up by Buzzer or Radio
In standby mode, you can set the alarm mode at the preset alarm times :
1.
To set or adjust the alarm time, follow the steps in
“Clock and Alarm Time Setting”.
2.
To set alarm mode (radio or buzzer) or disable the alarm function for
ALARM 1
, Press
AL1 (3)
repeatedly until the desired alarm mode appears on the display. Each time you
press
AL1 (3),
the alarm indication changes as follows :
No alarm indication (alarm 1 is disabled)
AL1 buzzer indicator (14)
AL1 radio indicator (15)
No alarm indication (alarm 1 is disabled)
3.
To set alarm mode (radio or buzzer) or disable the alarm function for
ALARM 2
, Press
AL2 (4)
repeatedly until the desired alarm mode appears on the display. Each time you
press
AL2 (4),
the alarm indication changes as follows :
No alarm indication (alarm 2 is disabled)
AL2 buzzer indicator (16)
AL2 radio indicator (17)
No alarm indication (alarm 2 is disabled)
4.
When the preset alarm time is reached, the alarm will sound in the selected alarm mode
unless the alarm function is disabled.
Note:
While volume of buzzer alarm is fixed and cannot be adjusted, the volume and frequency
of radio alarm are preset as last tuned. When the radio alarm sounds, you can also adjust the
listening level by
VOLUME (3) / (4)
buttons. To select the station, refer to
“Radio
Operation
”.
Review the Alarm Time
In standby mode, press and hold
AL1 (3)
button for
ALARM 1
or
AL2 (4)
button for
ALARM 2
until then the alarm time setting blinks in the display. Press
AL1 (3)
(for
ALARM 1
) or
AL2 (4)
(for
ALARM 2
) again to return to the clock time display.
Snooze Function
When the alarm is sounding, press the
SNOOZE (10)
button to stop the alarm temporarily. The
“
AL1/AL2 buzzer indicator (14)/(16)
or
AL1/AL2 radio indicator (15)/(17)
” will keep
blinking while the snooze function is in operation, and the alarm will sound again after about 9
minutes. To stop the alarm, press the
POWER (1)
button once. The alarm indicator will
become solid and the alarm will function at the same time the next day.
Adjusting the brightness of the display (dimmer control)
Press the
DIM (11)
button to switch between High or Low dimmer as required.
Radio Operation
Listen to the Radio
1.
Press the
POWER (1)
button to turn on the radio.
The default frequency 87.5 (MHz) (for first use) or the last tuned
frequency will be displayed.
