WOP-2ac-LR5. User manual
35
•
•
•
•
•
•
•
•
•
4.8.2 The 'Access' submenu
In the 'Access' submenu, access to the device via the web interface, Telnet, SSH, NETCONF and SNMP is
configured.
To enable HTTP access to the device via the web interface via HTTP protocol, set the flag in front of 'WEB'.
In the opened window, it is possible to change the HTTP port (by default, 80). In addition to the default one,
ports can take values from 1025 to 65535 inclusive;
To enable access to the device via the web interface via HTTPS protocol, set the flag in front of 'WEB-
HTTPS'. In the opened window, it is possible to change the HTTPS port (by default, 443). In addition to the
default one, ports can take values from 1025 to 65535 inclusive;
To enable access to the device via Telnet, select the checkbox in front of 'Telnet';
To enable access to the device via SSH, select the checkbox in front of 'SSH';
To enable access to the device via NETCONF, select the checkbox in front of 'NETCONF';
WOP-2ac-LR5
software allows device status and sensors monitoring via SNMP. In the 'SNMP' submenu, SNMP
agent can be configured. The device has support for SNMPv1, SNMPv2.
To change the SNMP settings, select the checkbox in front of 'SNMP', apply the configuration and then go to the
'SNMP' submenu.
roCommunity
–
a password to read the parameters (by default:
public
);
rwCommunity
–
a password to configure (write) parameters (by default:
private
);
TrapSink
–
IP address or domain name of SNMPv1-trap message recipient in HOST [COMMUNITY [PORT]]
format;
Trap2Sink
– IP address or domain name of SNMPv2-trap message recipient in HOST [COMMUNITY [PORT]]
format;
Note that the ports for the HTTP and HTTPS protocols should not have the same value.
