WB-15-W. User manual
5
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2 Device description
2.1 Purpose
WB-15-W is an all-weather wireless Wi-Fi access point with LTE support and a channel redundancy feature for
connecting network equipment to the Internet or departmental/corporate networks. The device supports router
mode, monitoring the quality of connection with the base station, traffic shaping.
WB-15-W is designed in a housing with an IP-54 protection, which allows you to operate the device in hard weather
conditions.
Power is supplied through the terminals (in the car) or using Passive PoE technology.
2.2 Device specification
Interfaces:
1 port of 10/100Base-T(Ethernet)
1 interface of 2G/3G/4G with channel redundancy mode
2 SMA (female) connectors for connecting external 2G/3G/4G antennas (Omni, sector, panel, etc.)
1 SMA (female) connector for connecting external GPS antenna
Wi-Fi 2.4 GHz IEEE 802.11b/g/n
Device is powered through a 24V PoE injector from a 220V network, or through a DC power adapter.
Functions:
WLAN capabilities:
Support for IEEE 802.11b/g/n
Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
WMM-based priorities and packet planning
Support for hidden SSID
Subscriber isolation within one VAP
4 virtual access points
Channle autoselection
Radio scan
Network functions:
Autonegotiation of speed, duplex mode and switching between MDI and MDI-X modes
Router operation mode
Static routing
DHCP server
Static lease
ACL
NTP
QoS functions:
Priority and profile-based packet scheduling
Capacity limitation for each SSID
Capacity limitation for each client
Client limitation for each VAP
WMM parameters changing
Do not use an injector with voltage different from 24V so as not to break down the device!
