ELTEX WB-15-W, User Manual

Page: 34 / 43

WB-15-W. User manual
34
•
•
•
•
•
•
•
•
•
•
•
•
•
4.9.2 The «VAP» submenu
Common Settings:
Enabled – when checked, the virtual access point is enabled, otherwise it is disabled;
SSID – virtual wireless network name;
Broadcast SSID – when checked, SSID broadcasting is on, otherwise it is disabled;
Station Isolation – when checked, station isolation from each other within the same VAP is enabled;
Maximum Stations – the maximum number of clients connected to the virtual network;
Security – security mode for wireless network:
Off – do not use encryption for data transfer. The access point is available for any subscriber to
connect;
WPA, WPA2, WPA/WPA2 – encryption methods, if you select one of the methods, the following setting
will be available:
WPA Key – key/password required to connect to the virtual access point. The key length is from
8 to 63 symbols.
Shapers:
Show – display configuration field;
VAP Limit Down – restriction of bandwidth in the direction from the access point to the clients (in total)
connected to this VAP, Kbps;
VAP Limit Up – restriction of bandwidth in the direction from the clients (in total) connected to this VAP, to
the access point, Kbps;
STA Limit Down – restriction of bandwidth in the direction from the access point to the clients (each
separately) connected to this VAP, Kbps;
STA Limit Up – restriction of bandwidth in the direction from the clients (each separately) connected to this
VAP, to the access point, Kbps.
To apply a new configuration and save setting to non-volatile memory, press «Apply». Press «Cancel» to discard
the changes.