ELTEX TAU-8.IP User Manual Download Page 32

Page: 32 / 102

____________________________________________________________________________________

VoIP subscriber gateways

–

IGMP Uplink

– option is available for TAU-8.IP-W device – when checked; the multicast traffic will

be received from WAN interface of the service. Option can be enabled only in one service. WAN
interface of the service, where

IGMP Uplink

is set, will be used to receive IPTV signals.

Wi-Fi

– use this section to set the parameters of the wireless interface. The section is available only for

TAU-8.IP-W devices.

–

Wi-Fi access mode

–

determine operation mode for wireless interface in the service:

–

Off

– access to the service via wireless interface is disabled;

–

Tagged

– access to the service is performed via tagged wireless interface (VLAN ID is

specified in the field ‘

VLAN

identifier’

– see above);

–

Untagged

–

access to the service is performed via untagged wireless interface;

–

Bridge mode

– when checked, the device operates in the bridge mode (network traffic pass

between WAN and Wi-Fi interfaces transparently). In bridge mode it is available via IP address of
WAN interface;

–

SSID

–

wireless network name (max length of the name is 32 symbols), entering with case-sensitive

of keyboard. The parameter can include digits, Latin letters and the next symbols: "-", "_", ".", "!",
";", "#" (take into account that "!", ";" and "#" symbols can’t be placed first).

Please note that the

field should be filled obligatory

;

–

WLAN IP-Address

– IP-address of wireless access point;

–

WLAN Netmask

– subnet mask of wireless access point;

–

Enable WLAN DHCP-server (Local DHCP-server)

– when checked, host connecting via Wi-Fi to TAU-

8.IP-W can get IP address, subnet mask and other parameters (that are required for work in
network) from a built-in DHCP server automatically.

Access configuration

– use this section to set permission for access to the device via Web-interface and

via Telnet, FTP and SSH protocols.

–

WAN access

– to enable access to the device from external network, you should set the flag

opposite to the required connection: Web, Telnet, FTP, SSH and SNMP;

–

WLAN access

– only for TAU-8.IP-W devices – to enable access to the device from wireless

network, you should set the flag opposite to the required connection: Web, Telnet, FTP, SSH and
SNMP.

Common settings

–

use this section to set parameters that are applied to all the services configured on

the device.

–

1st DNS server, 2nd DNS server

– server addresses of domain names (it is used for host IP address

determination by using its domain name). These fields can be empty, if they are not required;

–

Run Local DNS-server

– when checked, local DNS server is enabled otherwise it is disabled. Option

is applied only to the TAU-8.IP-W devices. Local DNS server operates on the side of the device
wireless interface. When option is enable, local DHCP server as a DNS address get WLAN interface
address to the users. It is recommended to leave this option on;

–

IGMP Proxy

– when checked, IGMP Proxy is enabled (necessary for IPTV operation). Option is

available only for TAU-8.IP-W devices;

–

Default Gateway

– network gateway address by default. All traffic, which does not correspond to

none routing static rule, will transmitted to this address.

By default, gateway is used only for static installation method of IP address on
WAN interface.

–

WAN MAC address

–