_________________________________________________________________________________
_________________________________________________________________________________
58 Universal Network Terminal TAU-72.IP/TAU-36.IP
These settings match ones described in Section 5.1.2.2.5.
–
Configuration of a routing plan based on regular expressions.
Object identifier
enterprises.35265.1.9.30.5.3.1.
1
profileRegExpDialOn
Regular expression dialplan
2
profileRegExpDialProtocol
Protocol
3
profileRegExpDialText
Expressions
4
profileRegExpDialRowStatus
Row status. This parameter is mandatory for SNMP SET. To store
data in a file, set '1' as value.
These settings match ones described in Section 5.1.2.2.5
.
4
.
–
Call group configuration
Object identifier enterprises.35265.1.9.18.1.1.
Data readout performed for
enterprises.35265.1.9.18.fxsSerialGroupsNext
identifier allows you to get the
number of the next free group. You can configure up to 8 groups in total.
1
fxsSerialGroupsPhone
Phone (up to 20 characters)
2
fxsSerialGroupsEnabled
Enabled
3
fxsSerialGroupsSerialType
Type
4
fxsSerialGroupsBusyType
Busy mode
5
fxsSerialGroupsTimeout
Timeout (o to 99)
6
fxsSerialGroupsSipPort
SIP port (0 to 65535)
7
fxsSerialGroupsAuthName
Group name (up to 20 characters)
8
fxsSerialGroupsAuthPass
Password (up to 20 characters)
9
fxsSerialGroupsPorts
Ports (up to 48 characters)
10 fxsSerialGroupsSipProfile
SIP/H.323 profile
11 fxsSerialGroupsRowStatus
Row status. This parameter is mandatory for SNMP SET. To store
data in a file, its value should be as follows: to change the serial
group record, set value 1, to add a record
–
value 4, to remove a
record
–
value 2.
These settings match ones described in Section 5.1.2.7.
–
SNMP parameters configuration
Object identifier
enterprises.35265.1.9.31.
1
tauTrapSink
Trap Sink
2
tauTrapType
Trap Type
3
tauSysName
System Name