User manual for NV-510-WB 9
2
DESIGN
This section describes the design of the device case: the front, back and side panels of the device,
connectors, led indicators and controls.
2.1
Front panel of the device
The appearance of the front panel of the device is shown in the figure 2.
Figure 2 – Front panel of the device
The front panel of the device has an infrared receiver of the signal from the remote control (1) and a
LED indicator (1) showing the status of the device (see the table below).
Table 2 – device status light indication
LED
indicator
Status indicator
(1)
Device status
Solid green
The device is switched on and ready to operate
Solid red
The device is connected to a power supply, but is in standby mode
Off
The device is disconnected from a power supply or faulty
2.2
Rear panel of the device
The rear panel of the device is shown in the figure 3.
Figure 3 – Appearance of the rear panel of the device
The following connectors and controls are located on the back panel of the device (see table 3).
