ELTEX NTU-RG-1421G-Wac Operation Manual Download Page 50

Page: 50 / 53

____________________________________________________________________________________

NTU

Optical Network Terminals

4.5.4

The “Ping” submenu. Test the Availability of Network Devices

Use this menu to test the availability of network devices connected to the router with Ping utility.

In order to check availability of a connected device, enter its IP address into the field and click the

Ping

button. Click the

TraceRoute

button to view the route tracing. The information will be displayed on this page of

the web interface.

4.5.5

The “Password” submenu. Access control configuration (setting passwords)

Use the menu to change a device access password.

To change the password, enter the current password, then enter a new password and confirm it.

Click the

Apply/Save

button to accept and save the changes.

Summary of Contents for NTU-RG-1421G-Wac






















































Search results

Summary of Contents for NTU-RG-1421G-Wac

Reviews:

Related manuals for NTU-RG-1421G-Wac

Brands by name

Popular brands

ELTEX NTU-RG-1421G-Wac, Operation Manual

Search results

Summary of Contents for NTU-RG-1421G-Wac

Reviews:

Related manuals for NTU-RG-1421G-Wac

Brands by name

Popular brands