____________________________________________________________________________________
____________________________________________________________________________________
38
NTU
Optical Network Terminals
4.2.8
The “Z-Wave” menu
Use this menu to configure “Smart Home” parameters.
–
Enable Zway—
enable/disable “Smart Home” controller;
–
Host name—
specify IP address of “Smart Home” remote platform;
–
Port—
specify the platform port to which “Smart Home” controller is connected;
–
Enable secure connection—
set the flag if secure channel is used to share data with the platform;
–
Reset Zway cache—
when clicking the button, the controller is turned off; all information about the
connection to the platform, linked sensors and scripts is deleted from it.
Click the
Apply/Save
to accept and save the settings.
4.2.9
The “UPnP” submenu. Autoconfiguration of network devices
Use the menu to configure Universal Plug and Play (UPnP™) function.
UPnP ensures compatibility with network equipment, software and peripheral devices.
Configure NAT on an active WAN interface, to use UPnP.
Set the
Enable UPnP
flag
to enable UPnP.
Click Apply/Save button to accept and save the settings.
