___________________________________________________________________________
_______________________________________________________________________________
LTP-8X optical line terminal
43
LTP-8X(config)# ip snmp trap-community cm-traps
LTP-8X(config)# ip snmp community read cm-read
LTP-8X(config)# ip snmp community write cm-write
Step 6.
Configure variable snmp parameters.
LTP-8X(config)# ip snmp location NSK-1-12
LTP-8X(config)# ip snmp contact operator
LTP-8X(config)# ip snmp ont-sn-format numerical
Step 7.
The settings of SNMP agent change as soon as the configuration is applied. No terminal reboot is
needed.
LTP-8X(config)# do commit
Step 8.
Check the entered data by using the
show ip snmp
command.
LTP-8X(config)# do show ip snmp
Snmp:
Enabled: true
Access control: true
Allow ip [0]:
Ip: 192.168.16.0
Mask: 24
Traps [0]:
Type: informs
Ipaddr: 192.168.16.102
Traps [1]:
Type: v1
Ipaddr: 192.168.16.13
Traps [2]:
Type: v2
Ipaddr: 192.168.16.130
Traps [3]:
Type: informs
Ipaddr: 192.168.16.230
Version: v2
Communityro: 'cm-read'
Communityrw: 'cm-write'
Trap community: 'cm-traps'
Location: 'NSK-1-12'
Contact: 'operator'
Alias:
<for showing use separate command>
EngineID: 0x4086E891E8582F2FE68B944C4B
Types and designation of SNMP traps are closely related to the active alarms log and
described in details in Section 0, page 48.
13.2
NTPD Configuration
The terminal does not have integrated realtime clocks with a battery. For the events in system log to
have correct time displayed and for automatised operations to be performed in time, time
synchronisation should be adjusted with the help of the NTP protocol.
Step 1.
Switch to the
configure
view
.
LTP-8X# configure terminal
