8
BA-en-3020-2101_R130A / R130A3L / R131A / EXR130A / EXR130A3L
2. Safety
The units have been designed, built and tested using state-of-the-art engi-
neering, and have left the factory in a technically and operationally safe
condition. If used improperly, the units may nevertheless be hazardous to
personnel and may cause injury or damage. Read the operating instruc-
tions carefully and observe the safety instructions.
2.1 Proper Use
The charging bars of the series R130A / R130A3L / R131A / EXR130A /
EXR130A3L must only be used for applying static electrical charges onto
paper, fabrics, foils, plastics, etc. for the purpose of creating a static adhe-
sion effect.
The R130A / R130A3L / R131A / EXR130A / EXR130A3L charging bars
may only be operated with the accompanying Eltex high voltage genera-
tors (see Chapter 8 "Technical specifications"). These allow the flexible
adaptation to the required high voltages and currents for different active
bar lengths. The safe operation of the charging bars is only guaranteed by
using these Eltex generators.
Caution!
When using the EXR130A / EXR130A3L charging bar, please note the
operating instructions for the appropriate system and/or generator.
The manufacturers will not assume any liability and warranty if the units
are used improperly or used outside the intended purpose.
Modifications or changes made to the devices are not permitted.
Use only original Eltex spare parts and equipment.
2.2 Identification of risks and hazards
Possible risks and hazards resulting from the use of the units are referred
to in these operating instructions by the following symbols:
Warning!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in serious personal injuries.
Caution!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in damage to property.
Ex Warning!
For units with EX approval only.
This symbol denotes the special conditions which must be observed when
operating the system in explosion hazard areas as specified in the EX
approvals.
Ex!
