6
BA-en-2088-2207_ES60
2. Safety
The ES60 Power Supplies have been designed, built and tested using
state-of-the-art engineering, and have left the factory in a technically and
operationally safe condition. If used improperly, the units may neverthe-
less be hazardous to personnel and may cause injury or damage. Read
the operating instructions carefully and observe the safety instructions.
For warranty conditions, please refer to the General Terms and Conditions
(GTC), see www.eltex.de.
2.1 Proper use
The ES60 Power Supplies may be operated only in connection with the
appropriate Eltex discharging bars for AC operation as well as the ion
blower nozzles, ion blower pistols and distributors, , each with a perma-
nently connected high voltage cable.
Modifications or changes made to the power supplies are not permitted.
Use only original Eltex spare parts and equipment.
The manufacturers will not assume any liability and warranty if the units
are used improperly or used outside the intended purpose.
2.2 Identification of risks and hazards
Possible risks and hazards resulting from the use of the power supplies
are referred to in these operating instructions by the following symbols:
Warning!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in serious personal injuries.
Caution!
This symbol appearing in the operating instructions refers to operations
which, if carried out improperly, may result in damage to property.
2.3 Work and operational safety
Warning!
Carefully observe the following notes and the complete
!
Always observe the rules and regulations applying in your country with re-
ference to electrical appliances.
• Before carrying out repairs, cleaning or maintenance work involving the
power supplies and the discharging bars, switch off the power supply
and disconnect the mains power supply (see
chapter 6 "Trouble-shooting”, page 15
).
