User’s Guide
THEIA S String Inverters
357100.013
, Issue
2.0
, 2010 Aug
9
Mounting Fixture
Figure 1 Distances for mounting fixture positioning
(1)
Display position
(2)
Mounting fixture
(3)
Ventilation openings
(4)
Slotted piece for mounting bolts
(5)
Mounting bolts
(6)
Locking screw
(7)
Grip moldings
Install the mounting fixture as follows:
•
Unscrew mounting fixture (2) from the back of the inverter
- Two locking screws secure the inverter in the mounting fixture
- The locking screw (6) is marked by a paper strip with a lock symbol. The
locking screw is longer than the other housing screws
- Do not remove the paper strip
•
Mark the mounting holes using the mounting fixture as a template
- Observe dimensions and distances
- Observe a minimum distance of 50cm to the floor
- The display position (1) is stamped into the mounting fixture (2)
- The display position for the
THEIA S
series is marked with an
‘S’
•
Drill the mounting holes and insert the screw anchors
•
Bolt down mounting fixture (2)
