Quick Start Guide
Flatpack2 PS System, 4U, SP2-based
356825.103, 2v0 -2011-09
10
Front Keys and display, Controller Access via PC
Controller Access
Via Stand-alone PC
You can access the
Smartpack2 Master
controller directly from a stand-alone computer, or via a
Local Area Network (LAN) if available. Each controller is shipped with a unique
Eltek Valere
MAC address stored inside the controller and marked on the controller’s label, and with the fixed
IP address <192.168.10.20>. Do the following to access the controller:
1.
Start the “
Eltek Valere Network Utility
”
(EVNU) program (EVIPSetup.exe)
2.
Connect the computer to the controller;
check its MAC address is displayed
3.
Find the computer NIC’s IP address
and subnet mask (network card)
Tip: e.g. using DOS command IPCONFIG in a Command Prompt window
e.g. computer’s IP address <169.254.52.132> Subnet mask <255.255.0.0>
4.
Change the controller’s IP address
and Network Mask to the same range as the
computer’s (using the EVNU program)
Tip: 1. Select the controller, 2. Click in the “Configuration” button 3. Change
from e.g. default <192.168.10.20> <0.0.0.0> to IP address <169.254.52.133>
<255.255.0.0>, 4. Click on the “Enable Static IP” button
5.
Access the controller
’s configuration pages in your web browser (from EVNU)
6.
Log in
with the <admin> account,
7.
Change the controller’s Device Name
After accessing the controller, you can configure and monitor the power system with a standard
web browser (via
WebPower
) or via the
PowerSuite
program.
PowerSuite
’s newest version is
always available on our FTP server. Contact your closest
Eltek Valere
representative.
Flatpack2
Rectifier Module — front panel
Power LED
is
OFF
(mains unavailable),
Flashing
(controller accessing information) or
ON
(powered).
Warning LED
is
ON
(derating or similar minor
warning),
Flashing
(over-voltage mode) or
OFF
(OK)
Alarm LED
is
ON
(shutdown or similar major alarm)
or
OFF
(OK, no alarm)
Smartpack2 Master
Controller — front panel
Display:
is in
Status Mode
(displays the system’s status)
or in
Menu Mode
(displays the menu structure).
Operation:
Press on the
key to change from
Status
Mode
to
Menu Mode
and to select options, enter values.
Press the
key to navigate to previous level and
cancel options and values. Press the
or
keys to
navigate up- or downwards, point at options and
increase and decrease values. Press the
or
keys
to navigate one page up- or downwards and point at
options.
Menus:
When you “enter”
Menu Mode,
you access the
Main Menu
(Level 1). Default pin code <0003> (should
be changed) is used to change parameters.
Operation
Smartpack2 Master
controller
Handle in locked position
”
Enter
” key
“
Cancel
” key
Arrow keys
”
Alarm
” LED lamp (red)
“
Warning
” LED lamp (yellow)
“
Power
” LED lamp (green)
Graphical Color
Display
3.2” TFT 32k, QGVA
320x240
Flatpack2 HE
rectifier
”
Alarm
”
LED lamp (red)
“
Warning
”
LED lamp (yellow)
“
Power
”
LED lamp (green)
Ethernet
cable
Smartpack2
Master Controller
WebPower
(web-based
user interface)
(Standard straight
through cable
OR crossover cable)
Smartpack2 Master
controller (open)
Handle in open
position
SD card
RJ-45 socket
for Ethernet
connection