6
Elektroniksystem i Umeå AB Industrivägen 12, 90130 Umeå, Sweden
E-mail:
Web:
Installation
The ERS Desk should be mounted under a desk or table where the occupancy
needs to be measured. When installing, place the device far enough from the
edge of the table to make sure it is not possible to reach by the user. Mounting
close to the edge may result in damage to the device. See pictures for an
example. The blue and red areas are the ranges of the two different occupancy
sensors, make sure that the thermopile sensor is facing the front as shown.
1.
Remove the back panel of the sensor with a small screwdriver.