Elster Kromschroder VMF Operating Instructions Manual Download Page 9

VMF

, VMO, VMV · Edition 01.20

EN-9

CeRtIFICAtIon

Declaration of conformity

We, the manufacturer, hereby declare that the products 
VAS.../VAD/VAG/VAV/VAC/VAH/VBY/VRH/VMF/VMV/
VMO with product ID No. CE-0063BO1580 comply 
with the requirements of the listed Directives and 
Standards.
Directives:

 

– 2014/35/EU – LVD

 

– 2014/30/EU – EMC

 

– 2011/65/EU – RoHS II

 

– 2015/863/EU – RoHS III

Regulation:

 

– (EU) 2016/426 – GAR

Standards:

 

– EN 161:2011+A3:2013

 

– EN 88-1:2011+A1:2016

 

– EN 126:2012

 

– EN 1854:2010

The relevant product corresponds to the tested type 

sample.

The production is subject to the surveillance proce-

dure pursuant to Regulation (EU) 2016/426 Annex III 

paragraph 3.
Elster GmbH
Scan of the Declaration of conformity (D, GB) – see 
www.docuthek.com 

eurasische Zollunion

The products VMV meet the technical specifications 

of the Eurasian Customs Union.

ReACH Regulation

The device contains substances of very high concern 

which are listed in the Candidate List of the European 
REACH Regulation No. 1907/2006. See Reach list 
HTS at  www.docuthek.com. 

China RoHs

Directive on the restriction of the use of hazardous sub-
stances (RoHS) in China. Scan of the Disclosure Table 
China RoHS2, see certificates at  www.docuthek.com. 

Summary of Contents for Kromschroder VMF











Reviews: