VMF
, VMO, VMV · Edition 01.20
EN-8
VMV:
air flow rate Q for a pressure loss of Δp = 1 mbar:
∆p = 1 mbar
Q
min.
[m
3
/h]
Q
max.
[m
3
/h]
VMV 110
0.2
9.1
VMV 115
0.2
12.5
VMV 120, VMV 125
0.2
19.4
VMV 225
0.6
36.1
VMV 232–VMV 250
0.6
51.4
VMV 340
0.3
68
VMV 350
0.3
60.1
VMV 365
0.3
64.8
VMV:
air flow rate Q for a pressure loss of Δp =
10 mbar:
∆p = 10 mbar
Q
min.
[m
3
/h]
Q
max.
[m
3
/h]
VMV 110
0.4
22.9
VMV 115
0.4
31.4
VMV 120, VMV 125
0.4
48.8
VMV 225
1.5
91
VMV 232–VMV 250
1.5
129.6
VMV 340
0.3
68
VMV 350
0.3
60.1
VMV 365
0.3
64.8
VMF:
air flow rate Q for pressure loss Δp:
Air flow rate Q [m
3
/h]
for
Δp =
1 mbar
Δp =
10 mbar
VMF 110
4.9
15.5
VMF 115
7
22.1
VMF 120
13
41.2
VMF 125
16
50.7
VMF 225
23.2
73.5
VMF 232
31.9
101
VMF 240
38.3
121
VMF 250
41.1
130
VMF 340
61
194
VMF 350
64
203
VMF 365
68
218
DesIGneD LIFetIMe
This information on the designed lifetime is based on
using the product in accordance with these operat-
ing instructions. Once the designed lifetime has been
reached, safety-relevant products must be replaced.
Designed lifetime (based on date of manufacture) in
accordance with EN 13611, EN 161 for VM 1 to VM 2:
10 years.
You can find further explanations in the applicable
rules and regulations and on the afecor website (www.
afecor.org).
This procedure applies to heating systems. For ther-
moprocessing equipment, observe local regulations.
LoGIstICs
transport
Protect the unit from external forces (blows, shocks,
vibration).
Transport temperature: see page 7 (Technical data).
Transport is subject to the ambient conditions de-
scribed.
Report any transport damage on the unit or packaging
without delay.
Check that the delivery is complete.
storage
Storage temperature: see page 7 (Technical data).
Storage is subject to the ambient conditions described.
Storage time: 6 months in the original packaging before
using for the first time. If stored for longer than this, the
overall service life will be reduced by the corresponding
amount of extra storage time.
Packaging
The packaging material is to be disposed of in accord-
ance with local regulations.
Disposal
Components are to be disposed of separately in ac-
cordance with local regulations.
