Elster Kromschroder Linear flow control VFC Operating Instructions Manual Download Page 6

Elster GmbH
Postfach 28 09, D-49018 Osnabrück
Strotheweg 1, D-49504 Lotte (Büren)

T  +49 541 1214-0

F  +49 541 1214-370

GB-6

D

GB

F

NL

I

E

Contact

If you have any technical questions, please contact 
your local branch office/agent. The addresses are 
available on the Internet or from Elster GmbH.

We reserve the right to make technical modifications 

in the interests of progress.

[email protected], www.kromschroeder.com

Certification

Declaration of conformity

We, the manufacturer, hereby declare that the product 
VFC, marked with product ID No. CE-0063CO1153, 
complies with the essential requirements of the fol-

lowing Directives and Standards:
Directives:

– 2009/142/EC

Standards:

–  EN 13611

The relevant product corresponds to the type tested 

by the notified body 0063.

The production is subject to the surveillance proce-

dure pursuant to Directive 2009/142/EC Annex II 
paragraph 3. 
Elster GmbH

Scan of the Declaration of conformity (D, GB) – see 
www.docuthek.com

Eurasian Customs Union

The product VFC meets the technical specifications 

of the Eurasian Customs Union.

Contact

Summary of Contents for Kromschroder Linear flow control VFC







Reviews: