Elster GmbH
___________________________________________________________________________________________________________
EnCal 3000 - Hardware Manual
22/02/2018
44
/56
Mount the cap on the unit. Screw with hand until it is fixed. The marked screws in the following figure are security
screws. Screw out the security screws to prevent removing of the cap by accident or ignorance.
fig. 5-10 Location of security screws to fix the cap after mounting on the base
The unit will automatically start-up. The start-up sequence takes about 5 minutes, including temperature and pressure
stabilisation, and system flushing. After this sequence the unit is ready for the software configuration.
Check one more time if all gas connections are leak tight connected and all cable glands
for electrical connection are securely tight. Check also one more time the different gas
pressures for correct settings
Apply power to the unit (24 VDC) by turning on the external switch.
