manualshive.com logo in svg

Elsteam MISTRAL, Use And Maintenance Manual, Page: 17 / 64

Share
Download
Elsteam MISTRAL Use And Maintenance Manual Download Page 17

06/2022

| 17 | 

924EHUCE4.00 - Mistral

 Humidifier

4.4  MINIMUM INSTALLATION DISTANCES

When installing the Mistral

humidifierinenclosedspaces,observetheminimumdistanceof500mm(19.68in.)oneachside,soas

to guarantee adequate ventilation and aeration of the system.

 WARNING

MALFUNCTIONING OF THE EQUIPMENT

• Install the equipment in a position which ensures the minimum distances from all adjacent structures and equipment as 

indicated in this document.

• Install all equipment in compliance with the technical specifications indicated in the relevant documentation.

4.4.1  Open space

500 (19.68)

500 (19.68)

mm (in.)

500 (19.68)

500 (19.68)

5

10

20

30

50

Fig. 5. 

Minimum installation distances

4.4.2  Enclosed space

In the case of an installation in an enclosed space (e.g. fan convector or integration in a technical product) ensure that there is 
sufficient air circulation to avoid overheating and condensation.

Summary of Contents for MISTRAL

































































Reviews:

No comments