B
ef
or
e using
9
Using Pr
oduct
Viewer pr
ogr
am
Et
c.
Caution in installation
● Pls, check in-box contents.
● Decide the exact location to be installed and then clean the surface of the location on glass by dry
towels.
● Pls, check whether this device works normally before wiring works.
● Wiring works should be implemented under the main S/W off and then install outer mounted camera,
GPS and insert SD card.
● Before connecting electrical power, pls, check whether micro SD card is inserted properly or not.
● Pls, install this device, not to obstruct driver’s field of vision..
● Pls, take out protection film on camera lens after installation.
● Adjust direction of camera lens with looking at real-time images, after connecting electrical power.
● Pls, install rear camera, not to be obstructed by heat wire and tint films in order to keep high image
quality.
