6
Operation
Motor Control Unit MSG1-UP
• Version: 03.03.2016 • Errors and technical modifications subject to change without notice3
LED flashes: Dead man mode
LED on: Lock mode.
3. To change the mode, please press
Up
and
Down
again for 5 seconds.
4. The device leaves the state of readiness for change after 60 seconds of inactivity or
if you press
Up
and
Down
again for a short time.
3.2. Individual operation
The manual individual operation of the drive can be performed via an unlocked twin
push button at the manual input. This input is equipped with time-automated buttons.
By a short button stroke, the drive can be exactly positioned (e.g. slats of blinds). At a
longer button stroke (longer than 1 second), the drive travels in lock mode to the end
position. A short stroke on the opposite direction button stops the travel.
