2
Description
GPS-DCF Converter UTC±
• Date of issue: 17.05.2011 • Errors excepted. Subject to technical changes.
1.
Description
The
GPS-DCF Converter UTC±
can be connected to a DCF77 signal input as an alter-
native to a DCF77 antenna. The device receives global UTC via GPS and converts this
information into the DCF77 protocol.
The UTC offset at he installation location is set with DIP switches in the device. The
GPS-DCF Converter UTC±
then outputs the local time to the timer. When set to MEZ
(Central European Time), the summer/winter time change will take place automati-
cally.
1.0.1. Scope of delivery
•
Converter in housing for surface mounting
1.1. Technical data
2.
Installation and commissioning
2.1. Notes on installation
Installation, inspection, commissioning and troubleshooting of
the device must only be carried out by a competent electrician.
Disconnect all lines to be assembled, and take safety precautions against accidental
switch-on.
The device is exclusively intended for appropriate use. With each inappropriate change
or non-observance of the instructions for use, any warranty or guarantee claim will be
void.
After unpacking the device, check immediately for any mechanical damages. In case of
transport damage, this must immediately notified to the supplier.
If damaged, the device must not be put into operation.
Mounting
Surface-mounted
Protection rating
IP 54
Dimensions
approx. 80 x 80 x 55 (W × H × D, mm)
Weight
approx. 160 g
Auxiliary voltage
24 V DC
Auxiliary current
49 mA
DCF output
+24 V / - / out
