Radio dimmer RF-L-DST 1-10 V
2
Radio dimmer RF-L-DST 1-10 V
• Version: 16.05.2022 • Technical changes and errors excepted. • Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany • www.elsner-elektronik.de •
Technical Service: +49 (0) 7033 / 30945-250
2.3. Connection plan
2.3.1. Connection example
Mains connection wire and connection wires are available in different lengths as ac-
cessories.
Item numbers: Mains connection wire 60563 (5 m)
Connection wires 60565 (1 m), 60566 (2,5 m), 60567 (5 m)
2.4. Establish wireless connection
1. Set the control unit and/or remote control or the button to teaching mode (obser-
ve the corresponding manual/data sheet)
2. Switch on the
RF-L-DST 1-10 V
voltage supply or shut it off for at least 3 se-
conds if the unit is already supplied with power.
3. For 5 minutes after connecting the voltage, the
RF-L-DST 1-10 V
will send a "Le-
arn" telegram every 10 seconds.
4. The wireless connection will be established automatically. For building control
systems, the display will display "Device is learning".
5. The
RF-L-DST 1-10 V
will stop sending "Learn" telegrams once the reply "Lear-
ned" (for a learning process) or a control command is received (in the event of a
power interruption during operation).
3.
Disposal
After use, the device must be disposed of in accordance with the legal regulations.
Do not dispose of it with the household waste!
1 Neutral conductor
2 L
3 nc (not connected)
PE
Output
dimming 1-10 V
STAK3 coupling for
STAS3 plug
Input mains voltage
STAS3 slot for
STAK3 coupling
1 -
2 nc
3 +
Output switching
STAK3 coupling for
STAS3 plug
1 Neutral
conductor
2 L‘
3 nc
PE
PE
PE
