manualshive.com logo in svg

elsner elektronik KNX T-AP, Installation And Adjustment, Page: 2 / 30

Share
Download
elsner elektronik KNX T-AP Installation And Adjustment Download Page 2

Product Description .......................................................................................... 3

 

Technical specifications ................................................................................................. 3

 

Installation and Commissioning ........................................................................ 4

 

Installation position ....................................................................................................... 5

 

Layout KNX T-AP ........................................................................................................... 5

 

Connection of the temperature sensor ........................................................................... 6

 

Notes on installation ............................................................................................................................. 6

 

Maintenance ................................................................................................................... 6

 

Transmission protocol ....................................................................................... 7

 

Abbreviations ................................................................................................................. 7

 

Listing of all communication objects ............................................................................. 7

 

Setting of parameters ...................................................................................... 11

 

General settings ........................................................................................................... 11

 

Temperature measured value ....................................................................................... 12

 

Temperature threshold values ......................................................................................  13

 

Temperature threshold value 1 / 2 / 3 / 4 ........................................................................................... 14

 

Temperature PI control ................................................................................................ 17

 

Logic............................................................................................................................. 24

 

AND Logic 1 / 2 / 3 / 4 .......................................................................................................................... 25

 

Linkage inputs of AND logic ............................................................................................................... 26

 

OR Logic 1 / 2 / 3 / 4 ............................................................................................................................. 27

 

Linkage inputs of OR logic .................................................................................................................. 28

 

 

KNX T-AP | from software version 0.2.0, ETS programme version 2.0 | Version: 29.03.2012.  

Errors excepted. Subject to technical changes. 
 
 

 
 

 
 

 
 
 

 
 

 
 

 
 
 

Elsner Elektronik GmbH

 Control and Automation Engineering 

Herdweg 7  • D-75391 Gechingen • Germany 
Phone: +49 (0) 70 56/93 97-0 • Fax: +49 (0) 70 56/93 97-20 

[email protected] • www.elsner-elektronik.de 

Summary of Contents for KNX T-AP































Reviews:

No comments