Power Supply Systems KNX PS640(USB)
Version: 155.05.2013
Subject to technical changes. Errors excepted.
5
Operation
Starting Position
The following may be read off and set on the display of the power supply system KNX
PS640:
·
Reset of a line
·
Recall of the data memory with operating hours, overcharge, external electrical
surge, internal electrical surge, short circuit and excess temperature
·
Recall of the operating data bus voltage, bus current and temperature
·
Language of display
The display is dimmed after 60 seconds if during this period no key is pressed.
Line reset
Standard screen:
Press key once.
Press key once more in order to get into the sector “Line reset”.
Move the cursor (flashing rectangle at right edge) to the desired setting with the keys
or and confirm with key .
Yes:
Reset is activated. The line is switched to neutral and shorted. The
basic setting displays: “Reset is active!”
No:
Reset not activated. The power supply system works in normal
operation.
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
Reset: Yes ™
No
30 seconds
Reset not active!
Line Reset
> ™
Data Memory >
Operating Data >
Language
elsner elektronik
KNX Power Supply
Normal Operation
Diagnostics >
