3
Description
Sensor KNX AQS/TH-B-UP
• as of software 3.1 • Status: 24.09.2014 • Technical changes reserved. Errors reserved.
•
2 actuating variable comparators
for output of minimum, maximum or
avarage values. Each with 5 inputs (for values received via communication
objects)
Configuration is made using the KNX software ETS. The
product file
, the data sheet
and the manual can be downloaded from the Elsner Elektronik homepage on
www.elsner-elektronik.de
in the “Service” menu.
1.0.1. Scope of delivery
•
Housing with display, buttons and sensor board
•
CO
2
sensor unit
•
Base plate
You will need
in addition
(not supplied):
•
Socket Ø 60 mm, 42 mm deep
•
Frame (for element 55 x 55 mm), suitable for the switching programme used in
the building
1.1. Technical specifications
Housing
Plastic material (partly lacquered)
Colours
• White glossy (similar to RAL 9016 Traffic White)
• Aluminium matt
• Anthracite matt
• Stainless steel
• Special colours on request
Mounting
In-wall (in socket
Ø 60 mm, 42 mm deep)
Protection category
IP 20
Dimensions
Housing approx. 55 x 55 (W x H, mm),
mounting depth approx. 15 mm,
base plate approx. 71 x 71 (W x H, mm)
Total weight
approx. 72 g
Ambient temperature
Operation -10…+50°C, storage -20…+60°C
Ambient air humidity
max. 95% R. H., avoid bedewing
Operating voltage
KNX bus voltage
Bus current
max. 10 mA
Data output
KNX +/- bus terminal plug
BCU type
Own micro controller
PEI type
0
Group addresses
max. 254
Allocations
max. 254
Communication objects
253
CO
2
measurement range
0...2000 ppm
CO
2
resolution
1 ppm
CO
2
accuracy*
± 50 ppm ± 3% of the measuered value
