![background image](http://html1.mh-extra.com/html/elsner-elektronik/corlo-touch-knx-5in/corlo-touch-knx-5in_technical-specifications-and-installation-instructions_2396716004.webp)
4
Installation and start-up
Display Corlo Touch KNX 5in
• Status: 22.02.2017 • Technical changes and errors reserved.
The product conforms with the provisions of EU guidelines.
1.3. Customizing options
1.3.1. Colours for display edge and housing
The standard colour for the display edge and housing is glossy black. Special paints
are possible, e. g. to RAL or automobile paint colour codes. Please ask for your desired
colour.
The glass pane is only available with black painting, special colours are not possible.
2.
Installation and start-up
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
CAUTION!
Live voltage!
There are unprotected live components inside the device.
•
National legal regulations are to be followed.
•
Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.
•
Do not use the device if it is damaged.
•
Take the device or system out of service and secure it against
unintentional use, if it can be assumed, that risk-free operation is no
longer guaranteed.
Data output/
bus communication
KNX +/- Bus connector terminal
BCU type
unit's own microcontroller
PEI type
0
Group addresses
max. 1024
Assignments
max. 1024
Communication objects
1022
Other data interfaces
Micro SD
Inputs
4× Analog/digital,
max. cable length 10 m
Setting range of
temperature sensor T-NTC
at input of Corlo Touch
-40°C...+80°C