17
Setting parameters
Actuator KNX R1-B4 compact 16 A
• Version: 28.05.2020 • Technical changes and errors excepted.
The input can be disabled with a blocking object. Set what is sent to the bus when the
block is (de)activated.
If the block is active, there is
no
cyclic transmission.
Input as changeover switch:
If a key with a changeover function is assigned to the input, select the "Changeover"
bus function and determined whether the changeover takes place when the key is de-
pressed or when it is released.
The input can be disabled with a blocking object. For active blocking there is
no bus
communication
.
Input for shutter, blind, awning or window control:
If the input is used to control a drive via the bus, select the bus function "shutter", "awn-
ing", "blind" or "window" and define the button function and the control mode.
*A detailed description of the setting options for the individual control modes can be
found in chapter
Control modes for drive control
Cycle
(if sent periodically)
5 s • 10 s • 30 s • 1 min • 2 min • 5 min • 10
min • 20 min • 30 min • 1 h • 2 h
Use blocking object
No • Yes
When activating the block once
• send 0
• send 1
• Do not send message
When deactivating the block once
• send 0
• send 1
• Do not send message
• send current state
Function
Changeover switching
Command when pressing the button
• Changeover switching
• Do not send message
Command when releasing the button
• Changeover switching
• Do not send message
Use blocking object
No • Yes
Function
Shutter/blind/awning/window
Command (button function)
Up • Down
Up • Down • Up/Down
On • Off • On/Off
Open • Close • Open/
Close
(Shutter)
(Blind)
(Awning)
(Window)
Control mode*
• Standard
• Standard inverted
• Comfort mode
• Dead man’s switch
