43
Parameter setting
Actuator KNX S1R-BA4-UP 24 V
• Version: 27.05.2020 • Technical changes and errors excepted.
*A detailed description of the setting options for the individual control modi can be
found in the general part of chapter
Control modi for drive control
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input as dimmer:
If the input is used as a dimmer, select the bus function "Dimmer" and specify the
button function, time interval (switching/dimming) and if requested, the repeat interval
for a long button press.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input 8 bit encoder:
If the input is to be used as an 8bit encoder, select the "8 bit encoder" bus function and
specify which value will be sent.
Button function
Up • Down
Up • Down • Up/
Down
On • Off • On/Off
Open • Closed •
Open/Closed
(shutter)
(blinds)
(awning)
(window)
Control mode*
• Standard
• Standard inverted
• Comfort mode
• Dead man's switch
Use blocking object
No • Yes
Function
Dimmer
Button function
brighter • darker • brighter/darker
Time between switching and dimming
(in 0.1 s)
1...50; 5
Repeat the dimm command
no • yes
Repeat the dimm command
for a long button press
(if dimm command is repeated)
every 0.1 s • every 2 sec; every 0,5 sec
Dim by
(if dimm command is repeated)
1,50% • 3% • 6 % • 12,50% • 25% • 50%
Use blocking object
No • Yes
Function
8 bit encoder
Value
0...255
Summary of Contents for 70516
Page 2: ......
