3
Description
Temperature Sensor KNX T-AP
• Version: 27.01.2020 • Errors excepted. Subject to technical changes.
1.
Description
The
Temperature Sensor KNX T-AP
measures temperature in indoor and outdoor
areas. The sensor can receive an external measured value via the bus and process it
with the own data to an overall temperature (mixed value).
The
KNX T-AP
provides four switching outputs with adjustable threshold values as
well as additional AND and OR logic gates. The sensor has got a PI controller for heat-
ing and cooling.
Functions:
•
Measurement of
temperature
•
Mixed value
from own measured value and external value (proportions can
be set in percentage)
•
PI controller for heating
(one or two step) and
cooling
(one or two step)
•
Threshold values
can be adjusted per parameter or via communication
objects
•
4 AND and 4 OR logic gates
with each 4 inputs. Every switching incident as
well as 8 logic inputs in the form of communication objects may be used as
inputs for the logic gates. The output of each gate may optionally be configured
as 1 bit or 2 x 8 bits
Configuration is made using the KNX software ETS. The
product file
can be down-
loaded from the Elsner Elektronik website on
www.elsner-elektronik.de
in the “Ser-
vice” menu.
1.1. Deliverables
•
Temperature sensor
1.2. Technical specifications
Housing
Plastic material, sensor sleeve metal
Colour
Grey
Mounting
On-wall
Protection category
IP 65
Dimensions
approx. 65 × 93 × 38 (W × H × D, mm)
Weight
approx. 70 g
Ambient temperature
Operation -30…+85°C, Storage -55…+125°C
Operating voltage
KNX bus voltage
Bus current
max. 5.5 mA, max. 15 mA when programming LED is
active
Data output
KNX +/- bus terminal plug
BCU type
Own micro controller
PEI type
0
Group addresses
max. 184
