![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633034.webp)
33
Automatic settings
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Switching on: To perform an Automatic Reset after a manual intervention, select
Yes
.
Switching off: To switch off the awning’s Reset function, select
No
(this is the default
setting).
Confirm your setting with the
OK
button.
Automatic Reset time and/or period can be set.
System > Automatic Settings > General Settings > Automatic Reset
3.3. Define automatic reset
3.1.5. Automatic blind and roller shutter settings
For connected blinds and roller shutters (or groups of blinds/roller shutters) the follow-
ing automatic settings can be changed:
•
Light intensity
•
Direction of sun
•
Height of sun
•
Movement position
•
Slat position (only for blinds)
•
Indoor sensor to be used for the blind/roller shutter
•
Indoor temperature block
•
Night closure
•
Timed closure
•
Outdoor temperature block
•
Frost alarm
•
Wind alarm
•
Rain alarm
•
Enable/Disable automatic reset
Alarm Functions
Alarm functions are used for shades in manual and in automatic mode.
Fire alarm
of a smoke detector has highest priority. All shades are retracted and can-
not be influenced either by automatic or manual operation.
During
frost, wind or rain alarm
the shades are retracted and cannot be manually
extended.
Shade settings
The settings are only executed if a shade is in automatic mode and none of the afore-
mentioned alarm functions is active.
The highest priority is given to the
outdoor temperature block
, followed by
timed
closure
(extend),
night closure
(extend) and
indoor temperature-block
(retract).
Only when the direction and height of the sun agree and there is no active block is the
automatic shading by light
intensity engaged.
Summary of Contents for 60121
Page 7: ...6 Clarification of signs ...