ELSKY EM218, User Manual, Page: 29 / 33

- 29 -
(6)Hard Disk BBS Priorities:
This is the priority setting for hard disk boot.
Notice:This option only appears if a hard disk is installed.
3.6 Save & Exit:
(1)Save Changes and Exit: Save,exit the BIOS settings,then restart the computer.
(2)Discard Changes and Exit: Give up your changes and exit the setting,then restart the computer.
(3)Save Changes and Reset: Save,exit the BIOS settings,then restart the computer.
(4)Discard Changes and Reset:Give up your changes and exit the setting,then restart the computer.
(5)Save Changes: Save BIOS setting.
(6)Discard Changes:Give up the changed settings.
(7)Restore Defaults:Restore the original factory 's settings.
(8)Boot Override:
This option is used to select the specified boot device.The boot devices are a SATA hard disk, a USB flash drive, an EFI
Shell, a PXE, etc.It will boot directly,does not need to save&exit.
Other methods: When booting, press "F11"to directly select the specified device to boot.