- 28 -
3.5 Boot:
(1)Setup Prompt Timeout:
Set the screen prompt time to wait when starting up.If you do not press the"Setup"hot key within the set time, it will
continue to start.By default,the motherboard is set to"1".
Warm reminder:If the computer's configuration is very advanced and starts is fast.And you want to see your
customized logo on screen. You can set larger value in Setup Prompt Timeout,the logo will disappear more slowly,the
computer will delay loading the system. Recommend:"Setup Prompt Timeout : 3".
(2)Bootup NumLock State:
Activate the numeric lock function of the keypad after the system is powered up to the DOS system.
Its options:
"On": Digital lock is on when the system starts up.
"Off": The keypad is in cursor control when the system starts up.
By default, the motherboard is set to"On".
(3)Full Logo:
This item is display switch of the customized LOGO in starting operating system screen.
The"Disabled"is turn off; The"Enabled"is turn on.
(4)Fast Boot:
The"Disabled"is turn off; The"Enabled"is turn on.
(5)Boot Option Priorities:
The system will detect the device in the set order. Find a device that can be booted and it will boot from this
device.The"Boot Option #1"is the priority boot device.
Summary of Contents for EM218
Page 5: ...5 2 COM...