ELSEMA
2-Channel 27MHz GIGALINK™ Receiver with relay outputs, GLR2702
- 2 -
When programming is completed and the GIGALINK cable is removed from the multi channel receiver-coding
socket, the 2-way dip switch is used to select different output modes. This is described below.
Output Modes
Relay output on the receiver can function in either momentary or latching mode. By default the mode is set to
momentary. Modes selectable from the 2-way dipswitch. Dipswitch 1 corresponds to relay channel 1 and
dipswitch 2 corresponds to relay channel 2.
Factory Default = Momentary
Momentary -
Output is active for as long as the transmitter button is pressed.
This is a standard mode on most automatic gates or garage door openers.
Latching -
Output remains active
until next press of the transmitter button.
Similar to switching "on" and "off" a light.
Security
Latching
-
Output remains active until power to the receiver is removed. Similar to security alarms
and fire alarms. To activate the security latching mode, a link needs to be soldered into the
hole marked as latching.
Customised Software
Custom output modes can be programmed to do special functions. Call Elsema for more details.
Products in the Range
GLR2701
1-Channel
GLR2701240
1-Channel, 240V
GLR2702
2-Channel
GLR2702240
2-Channel, 240V
GLR2703
3-Channel Receiver
GLR2704
4-Channel
Receiver
GLR2708
8-Channel
GLR2708R
8-Channel with
Relay Output
GLR2701SS
GLR2702SS
1,2 -Channel, Open
Collector Output
GLR2701SST
GLR2702SST
1,2 -Channel, Open
Collector Output
