iNode Care Sensor PHT – instruction manual
ELSAT s.c.
The picture below shows the
Thermometer
tab:
The following items can be set:
Alert if temperature is
:
no alarm
: the device does not respond to temperature changes.
greater than
: device sends an alert in case a set threshold temperature value is exceeded.
less than
: device sends an alert in case a set threshold temperature value is exceeded.
out of range
: sends an alert in case a crossing one of the set temperature threshold.
in range
: device sends an alert, in case that the temperature is between set temperature
values.
You can change the temperature threshold value or values in the range from-30 ° C to + 70 ° C.
Archive alerts
: the device saves the time of the beginning and end of any of the events selected
above.
Archive temperature
: the device keeps the record measured temperature every 1 minute.
Temperature correction
: the user can adjust the measured temperature in the range from -2 °C
to 2 °C with a resolution of 0.01 ° C.
You can save modified settings by pressing the
Write
button.
page 6
