Elsat iNode:0x0809 Instruction Manual Download Page 14

iNode Care Sensor PHT – instruction manual

ELSAT s.c.

5.

Disposal

All the packaging materials are recyclable and are labeled as such. Dispose of
the packaging in accordance with local regulations. Keep the materials out of
children reach, as the materials can pose a hazard. 

Proper disposal:

According to WEEE Directive (2012/19/UE) the crossed-out wheelie bin symbol (shown on
the left) is used to label all electric and electronic devices requiring segregation.

Do not dispose of the spent product with domestic waste: hand it over to an electric and
electronic device collection and recycling point. The crossed-out wheelie bin symbol placed
on the product, instruction manual or package communicates this requirement.

Plastics contained in the device can be recycled in accordance with their specific marking.
By recycling materials and spent equipment you will help to protect the environment.

Information on electric and electronic devices collection locations is available from local
government agencies or from the dealer.

Spent   or   fully   discharged   single-use   and   rechargeable   batteries   must   be   discarded   in
dedicated labeled bins, handed over to hazardous waste collectors or returned to electric
equipment dealers.

page 14

Summary of Contents for iNode:0x0809
















Reviews: