ELSA Synergy II, User Manual

Page: 9 / 40

After installing the drivers
ELSA SYNERGY II
3
After installing the drivers
In this chapter you will find descriptions of
K
where you can find the software for operating your ELSA graphics board,
K
the performance characteristics of your graphics board, and
K
how you can most effectively tuning for the combination of monitor and ELSA gra-
phics board.
Software installation from the CD
The ELSA graphics board is normally supplied with software on a CD-ROM . You will find
all the utilities described in this manual on the WINNERware CD – unless they are a com-
ponent of the operating system
.
Once you have successfully completed the steps described in the Installation Guide, your
ELSA SYNERGY II is integrated into your computer system with installed drivers. In this
way, you have very likely come to know the program ELSA CD setup. This program should
start automatically after inserting your
WINNERware
CD, but if not, then you can run the
SETUP.EXE from the CD’s root directory.
The CD setup recognizes the operating system and the ELSA graphics board. Based on
this information, the program displays the driver and the selection of software supported.
All of these programs are on the
WINNERware CD.
The right settings
Our tip is: Invest a little time at this stage and you won’t regret it. Take your time to set
up your system just right. Your eyes will thank you for it, and you are guaranteed to have
more fun in front of your screen.
List of software which can
be installed
Information about the ent-
ries listed