Workshop
ELSA MicroLink ISDN PCI
37
AT + MSN = (Phone number for incoming calls to the Ser-
ver) + CPN = (Phone number for outgoing calls of the
modem) + P = HDLC + F = SYNC
Setting up the Client
Following software and hardware components must be installed for your computer to
operate as a client:
K
Microsoft Dial Up Network (Control Panel, Software, Windows Setup, Connections)
K
client for Microsoft networks (Control Panel, Network)
K
the same network protocol as the server (Control Panel, Network)
K
You will need the computer name of the server to make the connection from the cli-
ent to the server. To find out this name, click
Start
E
Settings
E
Control Panel
E
Network
E
Identification
on the server.
To access the server from another computer, you first have to establish a connection to
the server within the Dial-Up Networking.
a
Double-click on
Make New Connection
in Dial-Up Networking. Enter a name for
the connection and select the first ISDN line for the connection. In the following
Summary of Contents for MicroLink ISDN PCI
Page 1: ...User Manual M ELSA MicroLinkTM ISDN PCI...
Page 4: ......
Page 10: ...Installation ELSA MicroLink ISDN PCI 4...
