ELSA GLoria-L, User Manual

Page: 34 / 60

ELSA Tools
ELSA GLoria-L, -L/MX, -XL, -XXL
28
햴
Enter the installation directory for the ELSAview 3D program files in the next dialog
box.
햵
The following dialog box allows you to specify whether the AutoCAD-ARX files
should be updated only in the directory currently specified, on all local drives or over
the entire network.
Once you have installed ELSAview 3D successfully, you will be able to start AutoCAD
directly and work with ELSAview 3D.
Press F1 to call up the online help. The online help has context-related information on
the various topics.
ELSA Driver for 3D Studio MAX/VIZ
ELSA offers a special driver for the 3D Studio MAX up to version 1.2 and 3D Studio VIZ.
The development of this driver has been based on the Heidi driver from 3Dlabs, which
takes full advantage of the graphics chip's capabilities. The optimization of the ELSA
driver lets you reach higher display speeds and thus is indispensable for the
ELSA GLoria.
햲
Ensure that 3D Studio MAX/VIZ has not been started.
햳
Insert the WINNERware CD into the CD-ROM drive and start the SETUP.EXE pro-
gram from the directory for your graphics board (e.g.
\GLORIA\XL\3DSMAX
for
the GLoria-XL).
The program guides you through each step of the installation. Read the instructions care-
fully, and answer and confirm each of the questions.
Further information on this special driver can be found in the README.TXT file in the
directory for your graphics board on the WINNERware CD (e.g.
\GLORIA\XL\3DSMAX
for the GLoria-XL).