ELSA ECOMO 20DFP99, User Manual

Page: 8 / 30

Introduction
ELSA ECOMO 20DFP99
2
쮿
AC/DC adapter
쮿
MDR 26 to 20-pin signal cable
쮿
USB cable
쮿
ELSA driver and utilities CD
쮿
ELSA DFP graphics board
Safety precautions
Power
Use the type of power indicated on the marking label.
Adapter
Only use an adapter designed for the LCD monitor (POTRANS UP06031120 or UMEC
UP0451E-12P).
Use of another type of adapter will result in malfunction and/or danger.
Plugs
쮿
Do not remove any parts of the monitor’s three-pronged power plug.
쮿
Disconnect the power plug from the AC outlet when the monitor will not be used for
an indefinite period of time.
Power and extension cords
쮿
Use the proper power cord with correct plug type. If the power source is 120V AC,
use a power cord that has UL and CSA approvals. If the power source is a 240V AC
supply, use the tandem (T blade) type attachment plug with ground conductor power
cord that meets the respective European countries’ safety regulations, such as VDE
for Germany.
쮿
We recommend using the power cord supplied with the product. However, if
another type of power cord is required, H05VV-F or VW-1, 18AWG x 3G should be
used.
쮿
Do not overload wall outlets or power cords. Be sure that the total of all units
plugged into the wall outlet does not exceed 7 amperes.
쮿
Be sure that the total ampere rating of all units plugged into the extension cord does
not exceed the rating of the cord.
쮿
If the monitor power supply cord requires a connection to the PC instead of the wall
outlet, this equipment is to be used with an UL approved computers which has
receptacle rate of 100~240V AC, 50/60Hz, 2.0A (minimum).