Introduction
ELSA ECOMO 17DFP99
2
쮿
ELSA driver and utilities CD
쮿
ELSA DFP graphics board
쮿
PDI Portrait Display CD, providing driver for rotating the LCD panel
Safety precautions
Power
Use the type of power indicated on the marking label.
Plugs
쮿
Do not remove any parts of the monitor’s three-pronged power plug.
쮿
Disconnect the power plug from the AC outlet when the monitor will not be used for
an indefinite period of time.
Power and extension cords
쮿
Use the proper power cord with correct plug type. If the power source is 120V AC,
use a power cord that has UL and CSA approvals. If the power source is a 240V AC
supply, use the tandem (T blade) type attachment plug with ground conductor power
cord that meets the respective European countries’ safety regulations, such as VDE
for Germany.
쮿
We recommend using the power cord supplied with the product. However, if
another type of power cord is required, H05VV-F or VW-1, 18AWG x 3G should be
used.
쮿
Do not overload wall outlets or power cords. Be sure that the total of all units
plugged into the wall outlet does not exceed 7 amperes.
쮿
Be sure that the total ampere rating of all units plugged into the extension cord does
not exceed the rating of the cord.
쮿
If the monitor power supply cord requires a connection to the PC instead of the wall
outlet, this equipment is to be used with an UL approved computers which has
receptacle rate of 100~240V AC, 50/60Hz, 2.0A (minimum).
쮿
Do not place anything on the power cord. Do not locate the product where a person
may walk or trip over the cord.
Environment
쮿
Place the monitor on a flat and leveled surface.
쮿
Place the monitor in a well-ventilated area.
