Troubleshooting
ELSA ECOMO 17DFP99
10
Troubleshooting
The monitor does not respond after you turn on the system
쮿
Check if the monitor is turned on.
쮿
Turn off the power and check the monitor power cord and signal cable for proper
connection.
쮿
Please make shure to use the latest BIOS version and drivers for the DFP graphics
board.
After installing the landscape software, the operating system
does not start properly
쮿
First boot the system in VGA safe mode, then uninstall the landscape software,
make shure to install the correct monitor INF-file to setup the display to the OS. Then
reinstall the landscape tool again.
The characters on the screen are dim
쮿
Refer to the 'Controls and functions' section to adjust the brightness.
The screen is blank
쮿
During operation, the monitor screen may automatically power down due to the
power saving feature. Move the mouse or press any key to see if the screen comes
back.
쮿
Refer to the 'Controls and functions' section to adjust the brightness.
Do not disassemble the monitor. Contact your dealer if service is needed.
